LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT S, 2D Convertible >> Repair and Diagnosis >> Transmission >> Manual Trans >> General, Technical Data - Rear Final Drive 02D, 0AV, 0BR, 0BS, 0BY (Roadster) >> 00 General, Technical Data >> General Information >> Rear Final Drive Identification >> Notes

Rear Final Drive Identification: Notes

NOTE:

The Haldex clutch is installed in the final drive.

The final drive and Haldex clutch have separate oil circuits.

The final drive "02D" and "0AV" are equipped with the Generation II Haldex-Clutch. For identification, refer to REAR FINAL DRIVE IDENTIFICATION  and REAR FINAL DRIVE IDENTIFICATION .

The Haldex-clutch Generation IV is already installed for the "0BR", "0BS" and "0BY". Identification, refer to REAR FINAL DRIVE IDENTIFICATION 

Rear final drives 02D, 0AV, 0BR and 0BY are installed in Audi A3 and Audi TT in the following transmissions:

The rear final drive 0BS is only installed in the Audi Q3 transmissions:

Allocation Rear Final Drive: