Turbocharger Vacuum Diaphragm

Removing 

-- Remove the turbocharger. Refer to TURBOCHARGER .

-- Remove the linkage securing plate -2-.

Fig 1: Locating Pressure Hose

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- and the bolts -1-.

-- Remove the pressure hose -arrow- and the vacuum diaphragm.

Installing 

• For the correct tightening specifications, refer to TURBOCHARGER OVERVIEW .

Installation is done is reverse order, observe the following:

-- Adjust the turbocharger vacuum diaphragm. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING .

-- Install the turbocharger. Refer to TURBOCHARGER .