Turbocharger Recirculating Valve -N249-
Removing
-- Remove the air filter housing. Refer to Removal and Installation .
-- Disconnect the connector -2-.
-- Remove the bolts -1- and the turbocharger recirculating valve.
Installing
Install in reverse order, paying attention to the following:
- Tightening specification, refer to TURBOCHARGER OVERVIEW .
NOTE:
Replace the O-ring.
- Installed position: The tab -2- on the turbocharger recirculation valve must be installed in the opening -1- on the intake tube.
-- Install the air filter housing. Refer to Removal and Installation .