Steering Column Switch Module Overview

Fig 1: Steering Column Switch Module, Assembly

Courtesy of AUDI OF AMERICA, LLC

1 - Screw
- 0.4 Nm
4 - Steering Angle Sensor -G85-
- Removing and installing, refer to STEERING ANGLE SENSOR -G85- .
5 - Transport Protection
- To secure coil connector with slip ring in center position.
6 - Coil Connector With Slip Ring
- Removing and installing, refer to AIRBAG SPIRAL SPRING/RETURN SPRING WITH SLIP RING .
  CAUTION:
  Risk of damaging coil connector.
  - Coil connector with slip ring is not to be turned following removal.
7 - Turn Signal Switch -E2-
- On vehicles with cruise control: with auxiliary Cruise Control Switch -E45-.
- Removing and installing, refer to TURN SIGNAL SWITCH -E2-, CRUISE CONTROL SWITCH -E45- .
8 - Windshield Wiper/Washer Switch -E22-
- Removing and installing, refer to WINDSHIELD WIPER/WASHER SWITCH -E22- .
11 - Mount
15 - Steering Column Electronic Systems Control Module -J527-
- Removing and installing, refer to STEERING COLUMN ELECTRONIC SYSTEMS CONTROL MODULE -J527- .
- Connector assignment of Steering Column Electronic Systems Control Module -J527-. Refer to STEERING COLUMN ELECTRONIC SYSTEMS CONTROL MODULE -J527- CONNECTOR ASSIGNMENT .