Outer CV Joint, Installing

Fig 1: Identifying Joint/Triple Roller Star Splines

Courtesy of AUDI OF AMERICA, LLC

-- Before installing CV joint or triple roller star, splines -A- must be lightly coated with grease used in joint.

-- Install old drive shaft bolt in joint as shown in the illustration.

Fig 2: Driving Joint Onto Shaft With Plastic Hammer Until Circlip Engages

Courtesy of AUDI OF AMERICA, LLC

-- Drive joint onto shaft with plastic hammer until circlip engages.

Inner CV joint, Disassembling and Assembling 

Fig 3: Driving Cover Down With Copper Or Brass Drift

Courtesy of AUDI OF AMERICA, LLC

-- Drive cover down with copper or brass drift.