Engine, Securing To Engine And Transmission Holder

Special tools and workshop equipment required

Procedure

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Hook the 2024 A to the engine and to the VAS 6100.

Fig 1: Engine Lifted

Courtesy of AUDI OF AMERICA, LLC

NOTE:

To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

WARNING:

Loose engine support bridge components could cause an accident.

Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

-- Lower the engine from the V.A.G 1383 A using the VAS 6100.

-- Secure the transmission side of the engine to the VAS 6095 as illustrated.

Fig 2: Identifying Engine And Transmission Holder VAS 6095

Courtesy of AUDI OF AMERICA, LLC