SUBFRAME Assembly Overview

Fig 1: Subframe Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Bracket to transmission
- Tightening specification, refer to Specifications
Bolts
- Pendulum supports to transmission
- Different lengths
- Tightening specification, refer to Specifications
Engine Support
- With support arm
- Illustration does not correspond to version in vehicle
Bolt
- 40 Nm plus an additional 180° turn
- Replace
- Engine support to engine
- Different lengths
Engine Mount
- With support arm
Bolt
- 40 Nm plus an additional 90° turn
- Replace
- Engine mount to body
Bracket
Bolt
- 20 Nm plus an additional 90° turn
- Replace
- Bracket to engine mount
Bolt
- 20 Nm plus an additional 90° turn
- Replace
- Bracket to body
Bolt
- Engine mount to body
- Replace
- 40 Nm plus an additional 90° turn
Bolts
- Engine mount to engine support
- Replace
- 60 Nm plus an additional 90° turn
Pendulum Support
Bolt
- Pendulum supports to subframe
- Tightening specification, refer to Specifications
Bolt
- Transmission mount to transmission bracket
- Tightening specification, refer to Specifications
Bolt
- Transmission mount to body
- Tightening specification, refer to Specifications
Transmission Mount
- With support arm
- S-Tronic transmission 02E is illustrated
Bolt
- Bracket to transmission
- Tightening specification, refer to Specifications
Bolt
- Transmission console to transmission
- Tightening specification, refer to Specifications
Transmission Bracket