Removal And Installation: Radiator
Special tools and workshop equipment required
- Hose Clip Pliers V.A.G 1921
Removing
NOTE:
If there are small impressions on the fins. Refer to COOLERS, CONDENSERS AND CHARGE AIR COOLERS .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove fan shroud. Refer to FAN SHROUD .
-- Remove air guide hose -arrows-.
-- Remove the upper coolant hose -arrow- from the radiator.
-- Remove the bolts -1 and 2- and remove the radiator upward.
Installing
- For the correct tightening specifications, refer to RADIATOR, FAN SHROUD AND COOLANT FAN OVERVIEW .
Installation is carried out in the reverse order while noting the following:
-- Air guides, installing with connector. Refer to AIR GUIDE PIPES AND HOSES WITH CONNECTOR COUPLING
-- Install the fan shroud. Refer to FAN SHROUD .
-- Fill the coolant system. Refer to COOLANT, DRAINING AND FILLING .