Removal And Installation: Radio

Required Special Tools and Equipment

-- If control module is replaced, select Replacement function for appropriate control module in Guided Fault-Finding routine.

Use the Vehicle Diagnosis, Testing and Information System to do so.

-- Activate transport mode in symphony. Refer to SYMPHONY TRANSPORT MODE, ACTIVATING/DEACTIVATING .

-- Switch off all electrical consumers.

-- Remove the key.

Removing

-- Insert radio removal tool in release slits on radio until they engage. Points on grip eyes face outward.

Fig 1: Removal Tool In Release Slits On Radio Until They Engage

Courtesy of AUDI OF AMERICA, LLC

-- Remove radio from instrument panel with radio removal tool grip eyes.

-- Release electrical connectors on radio and remove them.

-- Remove radio removal tool by pressing locking tabs on radio.

-- Remove front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

Installing

-- Install front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

-- Connect all electrical connectors.

-- Carefully slide radio into instrument panel and let it engage in mounting frame.

-- Deactivate transport mode in symphony. Refer to SYMPHONY TRANSPORT MODE, ACTIVATING/DEACTIVATING .