Radio Frequency Controlled Clock Receiver -J489-

Removing 

Fig 1: Identifying Radio Frequency Controlled Clock Receiver

Courtesy of AUDI OF AMERICA, LLC

-- Remove rear bumper cover. Refer to Removal and Installation .

-- Remove bolts -arrows- and remove Radio Frequency Controlled Clock Receiver -item 2-.

-- Disconnect electrical connector -1- on Radio Frequency Controlled Clock Receiver.

Installing 

• Tightening specification. Refer to INSTRUMENT CLUSTER AND CLOCK RECEIVER OVERVIEW .

Install in reverse order of removal. Note the following:

-- Install the cover on the rear bumper. Refer to Removal and Installation .