Removal And Installation: Damper

Removing 

-- Raise vehicle.

-- Remove front wheels.

-- Remove the dust cap.

-- Remove the screw -2-.

Fig 1: Damper On Front Brake Caliper Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

-- Remove the balance weight -3- and washer -4- from the brake caliper.

Installing 

-- Clean the brake caliper around the balance weight.

-- Install the washer -4- and balance weight -3- in the brake caliper.

-- Install a new screw -2- and tighten it to 10 Nm.

-- Install the dust cap -1-.

-- Mounting wheels, refer to General Information .