Bench Seat

Removing

Fig 1: Identifying Bench Seat, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Fold the front seat backrest forward as far as possible.

-- Move the front seats forward as far as possible.

-- Remove front edge of bench seat -1- in direction of -arrow- from omega clips -2- (quantity: 2).

Pfeil A - Omega clip mount

-- Tip bench seat -1- onto backrest -2- or -3-.

Fig 2: Identifying Bench Seat Retaining Eyes

Courtesy of AUDI OF AMERICA, LLC

-- Disengage retaining eyes -arrow- on bench seat -1- at left and right of backrest tube frame -2- or -3-.

-- Remove the bench seat -1- from the vehicle.

Installation

Fig 3: Identifying Bench Seat Retaining Eyes

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Make sure the retaining eyes -arrow- on bench seat -1- clamp the backrest frame connecting tube correctly.

2 - 1/2 right backrest

3 - 1/2 left backrest

-- Make sure the bench seat -1- is engaged correctly with the omega clips -2- (quantity: 2).

Fig 4: Identifying Bench Seat, Removal

Courtesy of AUDI OF AMERICA, LLC