Backrest Adjustment Actuator

Special tools and workshop equipment required

Trim removal wedge 3409

Fig 1: Identifying Trim Removal Wedge 3409
Courtesy of AUDI OF AMERICA, LLC

NOTE:

The backrest adjustment actuator can be removed and installed with the front seat installed.

Removing

-- Using Trim Removal Wedge 3409, pry actuator -1- out of catch on Driver Backrest Adjustment Switch -E96- or -E98-.

Fig 2: Pry Actuator Out Of Retainer Using 3409

Courtesy of AUDI OF AMERICA, LLC

Installation

Install in reverse order of removal.