Seat Height Adjustment Handle

Removing 

Fig 1: Pressing Retaining Clips Inward To Remove Seat Height Adjustment Handle From Lever

Courtesy of AUDI OF AMERICA, LLC

-- Pull seat height adjustment handle up and hold in this position.

-- Using a narrow screwdriver, press clips -1- inward -arrow A- and remove seat height adjustment handle -2- from lever -arrow B-.

Installation 

Fig 2: Retaining Clamp Installation Position

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Make sure the clip springs -2- (quantity: 2) -3- are positioned on outside of lever -1-.