Capacities, AUDI A3 (8P_) From My 04
Applies to the Audi A3, Audi A3 Sportback, Audi RS3 and Audi A3 Cabriolet.
Features of the refrigerant system:
- Expansion Valve
- Fluid Reservoir
- A/C compressor made by Denso, Delphi, Sanden or Zexel / Valeo with an A/C compressor regulator valve -N280-. Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Description and Operation .
| Vehicle model | Production period | Capacity in grams | Differing features of this refrigerant circuit |
|---|---|---|---|
Audi A3
|
As of 05.03 | 525 + / - 25 |
|
Audi RS 3
|
As of 01.11 | 500 + / - 25 |
|
Depending on time period of production and depending on engine, different A/C compressors are installed (these A/C compressors do not have an A/C clutch)
At the start production, Denso 7 SEU 16 A/C compressors were installed. As of model year 2004, there was a running change to Denso compressor type 7 SEU 17.
With a gradual introduction as of MY 2004 and depending on the engine, Zexel compressors (type DSC17E) and Sanden compressors (type PXE16) are installed. Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Description and Operation .
As of MY 2008, and depending on the engine, A/C compressors made by Denso (6 SEU 14) and Delphi are being installed. Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Description and Operation .
Beginning the production year 2006, the name of the Zexel A/C compressor was changed from Zexel to Valeo.