Capacities, AUDI A1 (8X_) From My 11
Features of the refrigerant system:
- Expansion Valve
- Fluid Reservoir
- Denso, Sanden (or Delphi) with A/C compressor regulator valve -N280-. Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Removal and Installation .
| Vehicle Model | Production Period | Capacity in Grams | Differing Features Of This Refrigerant Circuit |
|---|---|---|---|
| Audi A1 | As of 08.10 | 500 + / - 15 |
|
NOTE:
Depending on time period of production and depending on engine, different A/C compressors are installed (these A/C compressors do not have an A/C clutch)
At Start Of Production, A/C compressors manufactured by Denso type 6 SEU 14C or Sanden type 7 PXE 16 were installed. Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Removal and Installation .
Depending on the engine, an A/C compressor manufactured by Delphi type 6 CVC 140 will be installed at a later point in time (introduction still open). Refer to [For engine(s) BPY, CETA, CCTA, CDMA, CEPB] Removal and Installation .