Special Tools

Special tools and workshop equipment required 

• Flywheel Retainer 3067
  Fig 1: 3067 Counter-Hold Tool

  Courtesy of AUDI OF AMERICA, LLC
• Engine Support Bridge 10 - 222 A with Spindle 10 - 222 A /11
  Fig 2: Engine Support Bridge 10 - 222 A

  Courtesy of AUDI OF AMERICA, LLC
• Locking Pin T10060A
  Fig 3: Identifying Locking Pin T10060 A

  Courtesy of AUDI OF AMERICA, LLC
• Counter Hold Tool T10355
  Fig 4: Counter-Holder Tool T10355

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge 0-10 mm VAS 6079
  Fig 5: Dial Gauge VAS 6079

  Courtesy of AUDI OF AMERICA, LLC
• Pilot Drift VW 222 A
  Fig 6: Drift VW 222 A

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge Holder VW 387
  Fig 7: Dial Gauge Holder VW 387

  Courtesy of AUDI OF AMERICA, LLC
• Not illustrated:
• Guide sleeve T20097
• Internal Dial Gauge VAS 6078 or Inside Micrometer Set 18-100 mm US1033/S
• Engine and Transmission Holder VAS 6095