TV Antenna 2

TV antenna 2 / TV antenna 3 is located on the left and right A-pillars.

Removal and installation is same for TV antenna 2 and TV antenna 3.

-- Switch off all electrical consumers.

-- Remove the key.

Removing

-- Remove left A-pillar trim. Refer to Removal and Installation .

The TV antenna 2 / TV antenna 3 are protected from damage by a cover (metal part). It must be removed first.

-- Remove screws -1-.

Fig 1: Removing Screws

Courtesy of AUDI OF AMERICA, LLC

-- Remove cover -2- from the A-pillar.

-- Remove nut -4-.

Fig 2: Removing Nut

Courtesy of AUDI OF AMERICA, LLC

-- Raise TV antenna 2 -1- from retaining plate and disconnect connectors -2- and -3-.

Installing

-- Install in reverse order.