Determine Location Of Problem
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
It is very difficult to find the exact location of the problem. Replace the damaged fiber-optic cable and lay a new wire parallel to the defective fiber-optic cable.
NOTE:
- Select the damaged fiber-optic cable components with the "Guided Fault Finding" or "Guided Functions" from the vehicle diagnostic tester menu options.
- A fiber-optic cable that needs repair is represented by a "yellow" color.
-- Connect the vehicle diagnostic tester and turn on the ignition.
-- Select the following menu items:
- Guided Functions or Guided Functions
- GO TO
- Select Function/Component Selection
- Body
- Electrical Equipment
- 01 - OBD capable systems
- Ring Break Diagnosis
-- Remove the affected components.
-- Disconnect the connector from the components.
-- Assemble the fiber-optic cable: