Door Cut-Off Connector

Observe notes on contact corrosion. Refer to CONTACT CORROSION .

Procedure 

Fig 1: Pressing Dust Protection Boot At Marking And Pulling Off

Courtesy of AUDI OF AMERICA, LLC

-- Press dust protection boot -1- at marking -arrow- and pull off.

-- Release door cut-off connector -1- and remove outward -arrow-, press securing guide -2- to do so.

Fig 2: Releasing Door Connector To Remove Outward, Pressing Securing Guide

Courtesy of AUDI OF AMERICA, LLC

-- Make sure, connector engages audibly at connection.

-- Press on dust protection boot until it engages audibly.