Special Tools

Special tools and workshop equipment required 

• Vehicle Diagnosis, Testing and Information System VAS 5051B
• Magnetic ride Shock Absorber Prism T40129
• Spring compressor V.A.G 1752/1
• Spring holder V.A.G 1752/3A
• Grease cap puller VW 637/2
• Press tube 3241/4
• Assembly tool T10263
• Installation device 3372
• Assembly tool T10230
• Assembly tool T10205/13
• Socket XZN 24 T10361
  Fig 1: Identifying Socket XZN 24 T10361

  Courtesy of AUDI OF AMERICA, LLC
• Angle wrench V.A.G 1756
  Fig 2: Angle Wrench V.A.G 1756

  Courtesy of AUDI OF AMERICA, LLC
• Torque wrench V.A.G 1410
  Fig 3: Identifying Torque Wrench V.A.G 1410

  Courtesy of AUDI OF AMERICA, LLC
• Engine-/transmission jack V.A.G 1383 A with universal transmission support V.A.G 1359/2
  Fig 4: Engine & Transmission Jack VAG 1383 A

  Courtesy of AUDI OF AMERICA, LLC
• Wheel hub support T10149
  Fig 5: Identifying Wheel Hub Support T10149

  Courtesy of AUDI OF AMERICA, LLC
• Tensioning strap T10038
  Fig 6: Identifying Special tools -- Tensioning Belt T10038

  Courtesy of AUDI OF AMERICA, LLC
• Bit M18 T10162
  Fig 7: Socket XZN 18 T10162

  Courtesy of AUDI OF AMERICA, LLC
• Shock absorber set T10001
  Fig 8: Identifying Shock Absorber set T10001

  Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Assembly tool 3346
• Assembly tool 3350
• Fitting sleeve 3378
• Tappet 3390
• Torque wrench V.A.G 1331

Special tools and workshop equipment required 

• Pneumatic/hydraulic foot pump VAS 6179
• Hydraulic cylinder VAS 6178
• Engine-/transmission jack V.A.G 1383 A with universal transmission support V.A.G 1359/2
• Torque wrench V.A.G 1332

Special tools and workshop equipment required 

• Thrust plate VW 401
• Thrust plate VW 402
• Punch VW 408 A
• Punch VW 411
• Sleeve VW 416 B
• Thrust pad VW 447 H

Special tools and workshop equipment required 

• Circlip Pliers VW 161 A
• Torque Wrench V.A.G 1331
• Torque Wrench V.A.G 1332
• CV Joint Boot Clamp Tool V.A.G 1682
• Assembly tool T10065