LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Rear Suspension (Roadster) >> Rear Suspension >> Removal And Installation >> All Wheel Drive (AWD) >> Trailing Arm With Mounting Bracket >> Determining Installation Position of Mounting Bracket Relative to Trailing Arm

Determining Installation Position of Mounting Bracket Relative to Trailing Arm

Dimension -a- is 34 mm.

Fig 1: Installation Position Of Mounting Bracket To Trailing Link
GWWA42-0448Courtesy of AUDI OF AMERICA, LLC

1 - Mounting bracket

2 - Trailing link

-- When dimension -a- has been adjusted, tighten bolt.

scientia non olet · About LEMON Manuals