Removing Outer Constant Velocity Joint

-- Secure the drive axle with protective covers in a vise clamp.

-- Fold back boot.

-- Align the T10382 so that the flat side of the plate T10382/1 faces the spindles T10382/2.

-- Attach the T10382 to the VW 771.

-- Remove the CV joint from the drive axle using the T10382 and VW 771.

Fig 1: Identifying Outer CV Joint

Courtesy of AUDI OF AMERICA, LLC

1. T10382/1
2. T10382/2

Driving on Outer CV Joint