Brake Pedal And Brake Booster, Separating

Special tools and workshop equipment required 

• Release tool T40024

Separating 

-- Remove the driver side storage tray. Refer to Removal and Installation .

-- Disconnect the brake pedal from the brake booster using T40024.

Fig 1: Disconnecting Brake Pedal From Brake Booster Using Release Tool T 40024

Courtesy of AUDI OF AMERICA, LLC

-- Guide in the T40024 and press together, while pulling brake pedal toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the push rod.)

Installing 

Clip brake pedal to brake booster push rod ball head.

Fig 2: Brake Pedal, Joining To Brake Booster

Courtesy of AUDI OF AMERICA, LLC

-- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.

-- Install the driver side storage tray. Refer to Removal and Installation