Seat Height Adjuster

Special tools and workshop equipment required 

• Torque wrench V.A.G 1410
  Fig 1: Identifying Torque Wrench V.A.G 1410

  Courtesy of AUDI OF AMERICA, LLC
• Engine and transmission holder VAS 6095
  Fig 2: Identifying Engine And Transmission Holder VAS 6095

  Courtesy of AUDI OF AMERICA, LLC
• Fixture for seat repair VAS 6136
  Fig 3: Identifying Fixture For Seat Repair VAS 6136

  Courtesy of AUDI OF AMERICA, LLC

Fig 4: Identifying Seat Height Adjustment Unit Components

Courtesy of AUDI OF AMERICA, LLC

1. Retaining clip
2. Seat height adjustment handle lever
3. Seat height adjuster

   Removing 

   -- Remove the seat. Refer to SEAT .

   -- Mount the fixture for seat repairVAS 6136 on the engine and transmission holderVAS 6095.

   -- Attach the front seat to the fixture for seat repairVAS 6136.

   -- Remove backrest and front seat pan. Refer to FRONT BACKREST AND SEAT PAN .

   -- Remove nut -5-.

   -- Remove bolts -7- (quantity: 2).

   -- Remove the bolt -4-.

   -- Remove seat height adjustment unit -3- and retaining plate -6-.

   Installation 

   Install in reverse order of removal. Note the following:

   -- Make sure the retaining plate -6- makes contact on backrest frame at -position of arrow-.

4. Bolt
   • Tightening specification 8 Nm
5. Nut
   • Tightening specification 12 Nm
6. Retaining plate
7. Screws, (quantity: 2)
   • Tightening specification 8 Nm