LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Frames (Roadster) >> Seat Frames >> Description And Operation >> Manual Front Seats >> Modular Wiring Routing Versions >> >>Modular Light<<

>>Modular Light<<

A characteristic of the >>Modular Light<< versions is that only the side airbag wiring harness leads directly to the connector station in the vehicle floor. There is no additional connector (intermediate coupling) present in the side airbag wiring harness.

All other electrical or electronic components, for example, seat occupied recognition, electrically adjustable headrests, seat and backrest heating, electrical backrest adjustment, etc., have an additional connector (intermediate coupling) -1-, -2-, -3- on the underside of the seat pan upper frame.

Fig 1: Identifying Modular Light Wiring Routing
GWWA72-10398Courtesy of AUDI OF AMERICA, LLC

4 - Clip

All wiring harnesses are routed in a two-part corrugated pipe in the seat/connector station area.

scientia non olet · About LEMON Manuals