Cd Changer Harness Connectors

NOTE:

Unlisted connector terminals are not assigned.

Fig 1: CD Changer R41 12-Pin Multi-Pin Harness Connector

Courtesy of AUDI OF AMERICA, LLC

1 - CD data out to radio/navigation system with CD drive control module, radio/navigation display control module

2 - CLK out to radio/navigation system with CD drive control module, radio/navigation display control module

3 - Terminal 31

4 - Data in from radio/navigation system with CD drive control module, radio/navigation display control module

6 - Permanent positive from radio/navigation system with CD drive control module, radio/navigation display control module

7 - Right signal to radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio

8 - Positive switched from radio/navigation system with CD drive control module, radio/navigation display control module

9 - Signal ground from radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio

10 - Left signal to radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio

11 - TOC Check Control (not used)

12 - Terminal 58 (not used)