Outer CV Joint, 88 Mm Diameter Or 98 Mm Diameter: Removing

Fig 1: Identifying Outer CV Joint, Pressing Off

Courtesy of AUDI OF AMERICA, LLC

-- Secure The Drive Axle With Protective Covers In A Vise Clamp.

-- Open The Clamps.

-- Slide Back Protective Boot.

-- Remove The CV Joint From The Drive Axle Using A Drift -A-.

Drift -A- Must Be Installed Exactly On The Triple Roller Star Of The CV Joint.

-- Remove Joint And Protective Joint Boot.

Fig 2: Circlip

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Circlip -1-.