Outer CV Joint, 88 Mm Diameter Or 100 Mm Diameter: Removing

Fig 1: Inserting Pliers 3340 At Back Of Hose Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Secure The Drive Axle With Protective Covers In A Vise Clamp.

-- Open the clamp using :3340  .

Insert The :3340  At The Front Of The Clamp, As Shown In The Illustration.

-- Slide Back Protective Boot.

-- Strike A Copper Or Brass Drift -A- On CV Joint Inner Race With A Hammer.

Fig 2: Hitting Copper Or Brass Mandrel Onto Inner Ring Of Constant Velocity Joint

Courtesy of AUDI OF AMERICA, LLC

-- Remove Joint And Protective Joint Boot.

-- Remove The Circlip.