Inner CV Joint, 100 Mm Diameter Or 108 Mm Diameter: Notes

Special Tools And Workshop Equipment Required

Fig 1: Driving Cover Down With Copper Or Brass Drift

Courtesy of AUDI OF AMERICA, LLC

-- Secure The Drive Axle With Protective Covers In A Vise Clamp.

-- Drive Cover Down With Copper Or Brass Drift.

Fig 2: Secure Drive Axle With Protective Covers In A Vise Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Only Open And Remove The "Small" Protective Boot Clamp.

-- Remove Circlip.

Fig 3: Opening Clamps And Pulling Off CV Joint Boot From Inner Joint

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Inner CV Joint From The Drive Axle Using The Special Tools Illustrated.

Fig 4: Pressing CV Joint Off Of Drive Axle

Courtesy of AUDI OF AMERICA, LLC

-- Remove The CV Joint Boot From The Drive Axle.