LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Standard Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> REAR SUSPENSION (2 Of 2) (COUPE) >> 42 Rear Suspension >> Diagnosis And Testing >> Outer CV Joint, Checking >> Assembling

Outer CV Joint, Checking: Assembling

-- Insert cage with hub into joint body.

NOTE:

Cage must be installed laterally correct.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Press grease into joint body.

Grease capacities and types, drive axle with 88 mm diameter or 100 mm diameter outer CV joint. Refer To DRIVE AXLE OVERVIEW, WITH 88 MM DIAMETER OUTER CV JOINT AND 100 MM DIAMETER INNER CV JOINT .

scientia non olet · About LEMON Manuals