Installed Position And Tightening Sequence:

Fig 1: Installing Diagonal Brace (-Arrow- Faces Direction Of Travel)

Courtesy of AUDI OF AMERICA, LLC

-- Install The Diagonal Brace (-Arrow- Faces The Direction Of Travel).

-- First Tighten The Bolts To 5 Nm In Sequence -1, 2 And 3- And Then Tighten Them To The Final Tightening Specification. Refer To -Item  ) OVERVIEW - SUBFRAME, A5 FROM 09/2007 - BOLT.

Tightening Specifications. Refer To OVERVIEW - SUBFRAME .