Left And Right Timing Chain Cover, Removing And Installing: Removing
When installing, bring all cable ties back to same positions.
-- Remove the rear engine cover -2- upward.
-- Remove the affected Secondary Air Injection (AIR) combination valve: left refer to LEFT COMBINATION VALVE, REMOVING AND INSTALLING , right refer to RIGHT COMBINATION VALVE, REMOVING AND INSTALLING .
Left Timing Chain Cover
-- Remove the bolts -1- and move the bracket together with the wiring harnesses to the side.
Ignore items -2 and 3-.
-- Remove the bolts -1 through 8-.
-- Carefully remove the left cover for the timing chain from the bond.
Right Timing Chain Cover
-- Free up the fuel hose -1- and the Evaporative Emission (EVAP) canister hose -2- on the air duct pipe.
-- Remove the vacuum hose -3- from the air guide pipe connection.
-- Remove the air guide pipe by loosening the hose clamp -4- and opening the clips -arrows-.
-- Remove the bolts -3- and move the bracket together with the connectors to the side.
Ignore items -1 and 2-.
-- Remove the bolts -1 through 8-.
-- Carefully remove the right cover for the timing chain from the bond.