LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (2.0L - Lubrication - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 17 Lubrication >> Crankcase Ventilation >> Overview - Crankcase Ventilation >> Oil Separator on Cylinder Head Cover - Tightening Specification and Sequence

Oil Separator on Cylinder Head Cover - Tightening Specification and Sequence

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The bolts are thread-cutting. Only use original bolts when replacing the cylinder head, since the cylinder head is delivered without a thread for the installing the crankcase ventilation.
  • It is not permitted to cut the thread with a thread cutter.
GWWA15-10605Courtesy of
scientia non olet · About LEMON Manuals