Seat surface extension, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Special Tool - Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine and transmission holder VAS 6095

Fig 2: Fixture For Seat Repair VAS 6136

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fixture for seat repair VAS 6136

Fig 3: Seat Surface Extension Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Seat cushion extension

Removal

Remove seat → Front seats (standard seat), removing and installing .
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
Attach the front seat to the fixture for seat repair VAS 6136.
Remove drawer → Drawer, removing and installing .

Detach cover and cushion from seat pan → Cover and cushion for seat pan, removing and installing (sport seat) .
Detach seat cushion extension from cover and cushion.

Installing

Installation is reverse of removal.

2 - Seat surface extension base plate

3 - Nut

35 Nm
Qty. 4

4 - Screw

Qty. 4

5 - Grip

Removal

Remove bolts - 4 - (Qty. 4).
Remove handle - 5 -.

Installing

Installation is reverse of removal.

6 - Trim

Removal

Remove clips - 7 - (Qty. 4) on trim - 6 -.

Installing

Installation is reverse of removal.

7 - Clips

Qty. 4