LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1175 (Cooling System [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Coupe)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Electric Coolant Pump, Removing And Installing >> After-Run Coolant Pump -V51-, Removing And Installing, Version 2 >> Removing

After-Run Coolant Pump -V51-, Removing And Installing, Version 2: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen The Hose Clamps -Arrows- And Remove The Air Duct Hose.

Fig 1: Air Intake Hose Components
GWWA21-10302Courtesy of AUDI OF AMERICA, LLC
NOTE:

Lay A Cloth Below The Coolant Pipe To Catch Escaping Coolant.

-- Clamp Off And Remove The Coolant Hoses -arrows- With :3094  .

Fig 2: Identifying After-Run Coolant Pump Electrical Connector
GWWA19-10770Courtesy of AUDI OF AMERICA, LLC

-- Disconnect The Connector -2-.

-- Remove The Bolt -1- And The After-Run Coolant Pump -V51-.

scientia non olet · About LEMON Manuals