Directional Stabilization Assistance Control Module -J759- And Lens Screen: Removing

Fig 1: Identifying Cover Trim And Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Cover Trim -1- Down From The Bracket In The -Direction Of The arrow-.

-- Press The Retaining Clamp -1- In The -Direction Of The arrow- And Remove The Directional Stabilization Assistance Control Module Sideways And Down From The Bracket.

Fig 2: Pressing Retaining Clamp Forward And Removing Directional Stabilization Assistance Control Module J759 Sideways And Down From Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect The Electrical Connector And Remove The Directional Stabilization Assistance Control Module.

-- Press The Clamps -arrows-, Pull The Lens Screen Out Of The Bracket And Remove It Toward The Rear.

Fig 3: Pressing Clamps To Pull Lens Screen Out Of Bracket

Courtesy of AUDI OF AMERICA, LLC