SUBFRAME, Servicing, Rear Bonded Rubber Bushing For Rear Final Drive, All Wheel Drive (AWD) Vehicles: Removing

-- Remove the rear final drive. Refer To GENERAL, TECHNICAL DATA - REAR FINAL DRIVE 0BC (COUPE) .

-- Attach the tools to the subframe as illustrated.

Fig 1: Attach Tools To Sub Frame As Illustrated

Courtesy of AUDI OF AMERICA, LLC

1. :T40185/1  . Side "A" must face the subframe.
2. :3301 
3. :3346/3 
4. :T40185/9 
5. Subframe
6. Bonded rubber bushing
7. :T40185/7  . The "open" side faces up.

-- Remove the bearing from the subframe while turning at the :3346/3  and counter-holding at the :T40185/9  .