LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Cylinder Head, VALVETRAIN- CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Sliding Bar Ball, Installing >> Installing

Sliding Bar Ball, Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

GWWA15-11597Courtesy of AUDI OF AMERICA, LLC

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in direction of -arrow A- using the :T40191/1  and hold.

-- Push the sliding bar -3- in direction of -arrow B-.

scientia non olet · About LEMON Manuals