Cam Adjustment Actuator, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Check the O-rings for damage
-- Press down the cam adjustment actuator pin in direction of -arrow- by hand.
- The adjusting element pin must not be in the outward position.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Additional procedures. Refer to VALVETRAIN [For transmission(s) 0B5, 0CK]