LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 995 (Transmission System (Clutch - Service Information - 7-Speed Dual Clutch - 0CK, 0CJA, 0CLA, 0DN, 0DPA)) >> 30 Clutch >> Clutch >> Input Shaft Seal, Replacing >> Installing

Input Shaft Seal, Replacing: Installing

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

-- Place the :T40308  on the drive axle.

GWWA30-10348Courtesy of AUDI OF AMERICA, LLC

-- Drive in the new seal with the :T50038  in the clutch housing until it stops.

GWWA30-10335Courtesy of AUDI OF AMERICA, LLC

-- Remove the :T40308  .