LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 954 (Engine Assembly- CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA) >> Engine Assembly >> Engine, Removing And Installing >> Engine, Securing To Engine And Transmission Holder: Vas6095A >> Disassembly

Engine, Securing To Engine And Transmission Holder: Vas6095A: Disassembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING ENGINE CODES (CEUC, CRDB, CTGE, CWUB, CWUC) and/or DRIVE PLATE, REMOVING AND INSTALLING ENGINE CODES (CREC, CRED, CREH) .

-- Tighten the :VW540  on the transmission side as shown on the engine with the bolts -arrows- and nut -2-.

GWWA10-12054Courtesy of AUDI OF AMERICA, LLC

-- Secure the :VW540  with mounting pin -3- and cotter pin -1- on the :VAS6095A  .

scientia non olet · About LEMON Manuals