LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK, 0CJA, 0CLA, 0DN, 0DPA)) >> 34 Controls, Housing >> Transmission, Disassembling And Assembling >> Overview - Gear Set >> Overview - Gear Set, Fwd Vehicles >> Gear Positioner And Pressure Reservoir Bolts Tightening Sequence And Specifications

Gear Positioner And Pressure Reservoir Bolts Tightening Sequence And Specifications

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gear Positioner and Pressure Reservoir Bolts Tightening Sequence
GWWA34-11582Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace The Bolts.

-- Tighten The Bolts In Two Steps In The Sequence Shown: 

Step M6 X 30 Bolts Tightening Specification
1.  -1 to 8- 3 Nm
2.  -1 to 8- 90°
scientia non olet · About LEMON Manuals