Special Tools
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Used Oil Collection and Extraction Unit :SMN372500
- Locking Pin :T10492
- Ruler (2 pc.) :T40100
- Retaining Strap :T40155
- Oil Sump Assembly Pin :T40199
- Gearbox Support :T40206
and Gearbox Support - Drilling Template :T40206/3
- Gearbox Assembly Tool :T40213/1/2/3
- Assembly Tool :T40305
- Support :T40321
- Cover :T40322/1-4
- Engine and Gearbox Bracket :VAS6095A
- Shop Crane :VAS6100
- Engine Bung Set :VAS6122
- Electronic Torque Wrench 3-60Nm :VAS6583
- Puller - Grease Cap :VW637/2
- Slide Hammer Set :VW771
- Engine/Gearbox Support Shackle (2 pc.) :10-222A/12
- Lifting Tackle :3033
- Hook And Support Tool :3311
with Hook And Support Tool - Bolt :3311/1
- Lifting Eyebolt :3368
- Tools Not illustrated:
- Press Tool :T40323
- Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A