Transmission Fluid Auxiliary Hydraulic Pump -V552-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Locking Pin :T10492
- Electronic Torque Wrench 3-60Nm :VAS6583
WARNING:
The System Is Under Pressure.
- Deactivate the ATF pump and drain the hydraulic pressure reservoir before removing the transmission fluid pan!
- Refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .
CAUTION:
Contamination Damages The Mechatronic.
- A clean work environment is required for working on the Mechatronic.