LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK, 0CJA, 0CLA, 0DN, 0DPA)) >> 34 Controls, Housing >> MECHATRONIC >> Transmission Control Module -J217-, Removing And Installing >> Installing >> Procedure

Transmission Control Module -J217-, Removing And Installing: Installing: Procedure

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnostic.

-- Select the Test plan  tab.

-- Select individual test  button and select the following tree structure one after the other: