Solenoid Valves And Pressure Regulating Valves In Valve Body, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Electronic Torque Wrench 3-60Nm :VAS6583
- Cover :T40322/1-4
- Support :T40321
- Ruler (2 pc.) :T40100
NOTE:
Check Before The Repair, If The Necessary Replacement Parts Are Available.
WARNING:
The System Is Under Pressure.
- Deactivate the ATF pump and drain the hydraulic pressure reservoir before removing the transmission fluid pan!
- Also refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .
CAUTION:
Contamination Damages The Mechatronic.
- Pay attention to absolute cleanliness when working on hydraulic control.
- Even a small amount of debris can lead to system malfunctions.
- Remove the replacement parts from their packaging just prior to installing them.
- Protect open oil channels from debris.
NOTE:
Electric Allocation Of The Pressure Regulating Valves And Solenoid Valves. Refer to TRANSMISSION CONTROL .