Overview - Valve Body
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Low Pressure Filter Housing
- Bolt
- M6 X 20
- Quantity: 4
- Seal
- Suction Filter
- Bolt
- M5 X 18
- Quantity: 2
- Bolt
- Quantity: 3
- M6 X 20
- High Pressure Filter Housing
- High Pressure Filter
- Seal
- Seal
- Valve Units
- Removing and installing. Refer to SOLENOID VALVES AND PRESSURE REGULATING VALVES IN VALVE BODY, REMOVING AND INSTALLING .
- Valve Unit Retainer
- Bolt
- M4 X 35
- Quantity: 8
- Bleed Pipe
- Seal
- Seal
- Transmission Fluid Auxiliary Hydraulic Pump -V552- Motor
- Removing and installing. Refer to Transmission Fluid Auxiliary Hydraulic Pump -V552-, REMOVING AND INSTALLING .
- Cover
- Bolt
- 4 Nm + 45°
- M5 X 22
- Quantity: 4
- Transmission Fluid Auxiliary Hydraulic Pump -V552- Pump
- Removing and installing. Refer to Transmission Fluid Auxiliary Hydraulic Pump -V552-, REMOVING AND INSTALLING .
- Seal
- Seal
- Valve Body
- Removing and installing Transmission Control Module - J217- removing. Refer to Transmission Control Module -J217-, REMOVING AND INSTALLING .
- Seal
- Seal
- Low Pressure Switch