Hydraulic Pressure Sensor 1 -G545- And Hydraulic Pressure Sensor 2 -G546-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Mechatronic Remains Installed.
WARNING:
The System Is Under Pressure.
- The electronic ATF pump must be deactivated every time before opening the transmission, and the hydraulic pressure reservoir is drained.
- Refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .