Left Seal, Replacing, 0BC: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all general repair information. Refer to REPAIR INFORMATION .
-- Remove the rear final drive. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
Remove the Right Flange Shaft
-- Attach the Puller - Flanged Shaft T10037 to the housing -arrow- and remove the flange shaft.
Left Flange Shaft, Removing
-- Attach the Puller - Flanged Shaft T10037 to the housing -arrow- and remove the flange shaft.
-- Use a suitable tool to pry out the seal.